Ideal tool for checking roughness; it
measures “Ra” and “Rz” with ease.
Cycle time is about 5 seconds. The
result is saved until another measurement
is taken. Parameters Rz, Rp,
Rv and Rt can be displayed and
units of measure switched between
inch and metric without re-measuring
the part. Battery life is 5,000 measurements.
The instrument can be
split into two pieces.
The bottom half contains the traverse
mechanism and stylus pick up
assembly. This is placed on the surface
to be measured. The upper half
includes the large LCD display, start
button, mode and parameter buttons.
This is held comfortably in the
hand for easy operation and clear
viewing of the results.